Project Description

Main Project Image
The project owner hasn't added main project image yet.
Project description
Adafruit MAX31885 Thermocouple Amp breakout These are the Eagle CAD files for the Adafruit MAX31885 Thermocouple Amp breakout: ----> http://www.adafruit.com/products/269 Adafruit invests time and resources providing this open source design, please support Adafruit and open-source hardware by purchasing products from Adafruit! Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference. The MAX31855K does everything for you, and can be easily interfaced with any microcontroller, even one without an analog input. This breakout board has the chip itself, a 3.3V regulator with 10uF bypass capacitors and level shifting circuitry, all assembled and tested. Comes with a 2 pin terminal block (for connecting to the thermocouple) and pin header (to plug into any breadboard or perfboard). Goes great with our 1m K-type thermocouple. All text above must be included in any redistribution Designed by Limor Fried/Ladyada for Adafruit Industries. Creative Commons Attribution/Share-Alike, all text above must be included in any redistribution
Gallery
The project owner hasn't added any images yet.

Design Files

Embed Code
Component (12)
Qty
Description
adafruit:C-US:C0805K

C2, C1

2
adafruit:C-US:C0805K
microbuilder:MOUNTINGHOLE:2.0

U$5, U$4

2
microbuilder:MOUNTINGHOLE:2.0
adafruit:R-US_:R0805

R1, R2

2
adafruit:R-US_:R0805
adafruit:FIDUCIAL:

U$2, U$1

2
adafruit:FIDUCIAL:

Export Design Data

Open JSON Format
All model data in Upverter's Open JSON export format (more info)
Gerber Format (RS-274X extended)
CAD to CAM transfer instructions (more info)
NC Drill (Excellon)
NC drill and route machine instructions (more info)
XYRS
X-Y, rotation and side data for Pick and Place assembly (CSV)
PADS Layout Netlist
Export your schematic into a third-party layout tool
Dimension Drawing
Export the board outline, holes, and rulers
High-Res Schematic PNG
High resolution image form
3D Model (Step)
3D model of the board and components