motor_driver_with_sensors-v4

MyOrg
773
1
0
0
ESP32 with a solar battery charger, temp. & current sensors, and 2 motor drivers
Open in Editor
Forked from
motor_driver_with_sensors-v3
motor_driver_with_sensors-v3

MyOrg

Known forks (0)
We didn't find the known forks. Make the first fork
Tags
The project owner hasn't added any tags yet.

Open Web Foundation Contributor License Agreement 1.0 / OWF-CLA 1.0

Published: May 16, 2019 In development

Project Description

Main Project Image
The project owner hasn't added main project image yet.
Project description
This board is targeted to be used for motorized cellular shades. The board dimensions are constrained to fit inside the shade's top housing. The board has a current sensor to monitor the motor strain to tell whether the shade is being pulled up or let down. The board allows for a LiPo battery and solar panel so that the motorized shade doesn't have to be connected to a power source. The board has a buck converter to boost the battery voltage to 12 volts for the motor.
Gallery
The project owner hasn't added any images yet.

Design Files

Embed Code
Component (51)
Qty
Description
Capacitor

C20

1
Generic Capacitor (22nF)
Capacitor

C21

1
Generic Capacitor (5.1nF)
B520C-13-F

D1

1
Schottky Barrier Rectifier
LP5912-3.3DRVR

U4

1
500-mA Low-Noise, Low-IQ LDO

Show More

Export Design Data

Open JSON Format
All model data in Upverter's Open JSON export format (more info)
Gerber Format (RS-274X extended)
CAD to CAM transfer instructions (more info)
NC Drill (Excellon)
NC drill and route machine instructions (more info)
XYRS
X-Y, rotation and side data for Pick and Place assembly (CSV)
PADS Layout Netlist
Export your schematic into a third-party layout tool
Dimension Drawing
Export the board outline, holes, and rulers
High-Res Schematic PNG
High resolution image form
3D Model (Step)
3D model of the board and components

Show More