motor_driver_with_sensors-DRV8823-SPI

MyOrg
911
1
0
0
has a solar battery charger, temp. & current sensors, and motor driver. Meant to be connected to Imp, Proton, Arduino, or other micro.
Open in Editor
Forked from
motor_driver_with_sensors-v1
motor_driver_with_sensors-v1

MyOrg

Known forks (0)
We didn't find the known forks. Make the first fork
Tags
The project owner hasn't added any tags yet.

Open Web Foundation Contributor License Agreement 1.0 / OWF-CLA 1.0

Published: November 21, 2016 In development

Project Description

Main Project Image
The project owner hasn't added main project image yet.
Project description
This board is targeted to be used for motorized cellular shades. The board dimensions are constrained to fit inside the shade's top housing. The board has a current sensor to monitor the motor strain to tell whether the shade is being pulled up or let down. The board allows for a LiPo battery and solar panel so that the motorized shade doesn't have to be connected to a power source. The board has a buck converter to boost the battery voltage to 12 volts for the motor.
Gallery
The project owner hasn't added any images yet.

Design Files

Embed Code
Component (54)
Qty
Description
Resistor

R45

1
Generic Resistor (0)
Capacitor

C17

1
Generic Capacitor (22uF)
Capacitor

C15

1
Generic Capacitor (22nF)
Resistor

R49

1
Generic Resistor (10K)

Show More

Export Design Data

Open JSON Format
All model data in Upverter's Open JSON export format (more info)
Gerber Format (RS-274X extended)
CAD to CAM transfer instructions (more info)
NC Drill (Excellon)
NC drill and route machine instructions (more info)
XYRS
X-Y, rotation and side data for Pick and Place assembly (CSV)
PADS Layout Netlist
Export your schematic into a third-party layout tool
Dimension Drawing
Export the board outline, holes, and rulers
High-Res Schematic PNG
High resolution image form
3D Model (Step)
3D model of the board and components

Show More