Programmable Home Security Alarm System

Dilshan Jayakody
755
2
0
1
In this project we design low cost high performance programmable home security system using few LDR’s as an input sensors.
Open in Editor
Known forks (1)
Alarm System Test
Alarm System Test

Mike Leonard

Tags
The project owner hasn't added any tags yet.

No License

Published: September 11, 2013 Concept

Project Description

Main Project Image
The project owner hasn't added main project image yet.
Project description
In this project we design low cost high performance programmable home security system using few LDR’s as an input sensors. When above sensor(s) get triggered system may dial the user specified phone number (using build-in DTMF generator) and activate the high power audio alarm and lights. All the parameters of DTMF generator, audio alarm and light interface are programmed through the RS232 serial interface. Current firmware of this system presents interactive control system through the RS232 interface. This control system consist with the menu driven configuration options, self tests, system report generators, etc. This system also contain 5W (with 4Ω speaker) audio alarm with three selectable tone configurations, which include Police siren, Fire engine siren and Ambulance siren. This system uses a Microchip’s PIC16F877A as a main controller, LM339 as sensor interface, UM3561 as a tone generator and μPC2002 as a speaker driver (audio amplifier). LM7805, LM7812 and LM317 voltage regulators are used to obtain +5V, +12V and +3V respectively.
Gallery
The project owner hasn't added any images yet.

Design Files

Embed Code
Component (53)
Qty
Description
resistor:R-US_:0207/12

R43, R38, R21, R24, R2, R41, R14, R19, R10, R25, R1, R28, R31, R34, R29, R23, R40, R12, R26, R35, R22, R37, R39, R7, R16, R15, R32, R13, R42, R36, R30, R5, R20, R9, R17, R3, R33, R27

38
resistor:R-US_:0207/12
jumper:07

7
jumper:07
jumper:20

6
jumper:20
supply1:GND:

GND13, GND28, GND18, GND8, GND12, GND22, GND1, GND15, GND6, GND20, GND21, GND11, GND27, GND23, GND2, GND24, GND19, GND29, GND16, GND3, GND10, GND4, GND5, GND9, GND25, GND7, GND17, GND26, GND14

29
supply1:GND:

Show More

Export Design Data

Open JSON Format
All model data in Upverter's Open JSON export format (more info)
Gerber Format (RS-274X extended)
CAD to CAM transfer instructions (more info)
NC Drill (Excellon)
NC drill and route machine instructions (more info)
XYRS
X-Y, rotation and side data for Pick and Place assembly (CSV)
PADS Layout Netlist
Export your schematic into a third-party layout tool
Dimension Drawing
Export the board outline, holes, and rulers
High-Res Schematic PNG
High resolution image form
3D Model (Step)
3D model of the board and components

Show More