Project Description

Main Project Image
The project owner hasn't added main project image yet.
Project description
An updated design for an 8Bit MultiWii Flight Controller. Design features integrate many older designs such as the mMWC shield (http://www.rcgroups.com/forums/showthread.php?t=1684727) and the i2C_GPS_NAV add-on (http://www.rcgroups.com/forums/showthread.php?t=1970971). The mMWC shield designed has been modified to use an ATMega32u4-based, Arduino "Pro Micro" in place of the original Arduino "Pro Mini". A secondary "Pro Mini" has been retained to convert the MTK3339 GPS signal into i2c. NOTE: These configurations were common workarounds for the memory limitations of 8 bit microcontrollers, when they were commonly used as Flight Controllers. It is currently more common to find 32 bit or ATMega2560-based FCs that no longer require i2c conversions but nevertheless require greater specialization and cost signicantly more. In the interest of preserving the accessibility/affordability of the 8 bit designs, this project seeks to combine several approaches that enhance the capabilities of low-cost platforms.
Gallery
The project owner hasn't added any images yet.

Design Files

Embed Code

Export Design Data

Open JSON Format
All model data in Upverter's Open JSON export format (more info)
Gerber Format (RS-274X extended)
CAD to CAM transfer instructions (more info)
NC Drill (Excellon)
NC drill and route machine instructions (more info)
XYRS
X-Y, rotation and side data for Pick and Place assembly (CSV)
PADS Layout Netlist
Export your schematic into a third-party layout tool
Dimension Drawing
Export the board outline, holes, and rulers
High-Res Schematic PNG
High resolution image form
3D Model (Step)
3D model of the board and components